RSP ISO Certified

"Our Commitment to Quality"

Rolled Steel Products Management and Staff is committed to provide quality and service in every step of our more

Rolled Steel Products accepts the following types of credit cards:

Stainless Steel

Stainless Steel – Rolled Steel Products carries a wide range of finishes and types in both 300-400 series Stainless Steel sheet and coil. We are your one stop service center for all prime stainless requirements.


Type 304 (UNS S30400) is the most widely used of the austenitic chromium-nickel stainless steels.Its carbon content is lower and its corrosion resistance somewhat higher than Type 302. In the annealed condition, Type 304 is essentially nonmagnetic and becomes slightly magnetic when cold worked. In the lower carbon Type 304L material, carbide precipitation as a result of welding will be minimized, resulting in less susceptibility to intergranular corrosion.


Typical Applications:
  • Beer Barrels
  • Chemical Equipment
  • Coal Hopper Linings
  • Cooling Coils Cryogenic Vessels and Components
  • Dairy Equipment
  • Evaporators
  • Feed water Tubing
  • Food handling Equipment
  • Hypodermic Needles
  • Milking Machines
  • Nuclear Vessels & Components
  • Oil Well Filter Screens
  • Pressure Vessels
  • Sanitary Fittings and Valves
  • Shipping Drums
  • Still Tubes
  • Textile Dying Equipment
Type 430 is ductile, has good forming characteristic and is readily fabricated by such operations as bending, pressing, drawing and heading. Its tendency to work harden is much less than that of the nickel-bearing 300 series stainless steel. Type 430 does not have as good corrosion resisting properties as the chromium nickel steels. However, it is suitable for interior architectural and decorative household appliances trim as well as automotive body molding. Cold rolled Type 430 has an attractive bright finish which can be maintained with reasonable care and periodic cleaning. Type 430 is by far the most popular of all straight chromium stainless steels. It is the general purpose alloy of the ferritic class. This type contains approximately 17 percent chromium and is often referred as 17 chrome stainless. The higher chromium content imparts improved resistance of Type 430 is slightly less than carbon steel, but its thermal conductivity is one half that of carbon steel. Chromium stainless steel is magnetic.



Typical Applications:



  • Automotive Trim and Molding
  • Builders Hardware
  • Fasteners
  • Furnace Parts
  • Interior Architectural Trim and Paneling
  • Kitchen Trim and Equipment
  • Storage Vessels
  • Television Cones
  • Tobacco Machinery
  • Tubing
  • Vaults
  • Zippers