RSP IS ISO CERTIFIED

RSP Certified

"Our Commitment to Quality"

Rolled Steel Products Management and Staff is committed to provide quality and service in every step of our production....read more

Rolled Steel Products accepts the following types of credit cards:

Cold Rolled, Commercial Quality

Cold Rolled, Commercial Quality – sheet or coil steel supplied for either exposed or unexposed applications where bending, welding, forming, or moderate drawing is involved. "CRCQ" is available in coil, sheet or strip formed with various gauge ranges, widths, and hardness.

Classification

  • Commercial Steel (DS Types A, B, and C)
  • Drawing Steel (DS Types A and B)
  • Deep Drawing Steel (DDS)
  • Extra Deep Drawing Steel (EDDS)
  • Bright
  • Physical Quality
  •  

Cold Rolled ASTM A-1008

This specification covers cold-rolled, carbon steel sheets, in coils and cut lengths, in the following designations: commercial steels (CS Types A, B, and C); drawing steel (DS Types A and B); deep drawing steel (DDS); extra deep drawing steel (EDDS); structural steel (SS Grades 25, 30, 33 Types 1 and 2, 40 Types 1 and 2, 50, 60, 70, and 80); high-strength low-alloy steel (HSLAS Classes 1 and 2 of Grades 45, 50, 55, 60, 65, and 70), high-strength low-alloy steel with improved formability (HSLAS-F Grades 50, 60, 70, and 80); solution hardened steel (SHS); and bake hardenable steel (BHS). Conformance of the steel sheets to chemical composition requirements shall be tested by heat analysis. Specimens shall also undergo tension and bending tests and shall conform to specified values of tensile and yield strength, elongation, and bake hardening index. Unless otherwise indicated, sheet surfaces shall have a matte finish and shall be oiled.

For detail specification, please refer to www.astm.com